Description
When you need to cut through rebar, angle iron, or pipe in the shop or out in the field, having the right cutting wheel makes all the difference. A good cut-off wheel slices clean through metal without binding or breaking apart, so you can get back to fixing that broken bracket or cutting new material for a custom repair.
What You’re Getting
- Center reinforced design handles the stress of cutting without cracking or shattering
- Optimized for low horsepower chop saws that most farms and shops rely on
- 7/64-inch thickness gives you plenty of cutting life without being too thick to waste material
- 1-inch arbor hole fits standard chop saw spindles
- Comes in a box of 10 wheels so you’ll have spares when you need them
Built for Real Farm Work
These 12-inch wheels are sized just right for portable chop saws and smaller bench-mounted cut-off tools. Whether you’re cutting steel for gate repairs, trimming hydraulic lines, or shortening bolts, this wheel handles everyday metal cutting jobs around the farm. The red color coding makes it easy to grab the right wheel when you’re in a hurry.
Made to Last
The center reinforcement means this wheel won’t come apart under load like cheaper wheels sometimes do. It’s built to handle the vibration and side forces that come with cutting thick stock or working at awkward angles. The abrasive stays bonded properly so you get consistent cutting performance right down to the hub.
Good to Know
Make sure your saw’s maximum RPM doesn’t exceed 5,100—that’s the safe operating limit for these wheels. Always let the wheel do the work rather than forcing it through the cut, and keep a steady feed rate to avoid overheating. Having a box of 10 means you won’t run out in the middle of a project.
Reviews
There are no reviews yet.