Description
When you’re working on a repair where the bolt head needs to sit flush and stay put, a carriage bolt is your go-to fastener. That square shoulder under the dome head grabs into the material and won’t spin when you’re tightening the nut from the other side—no need to hold two wrenches or fight with a turning bolt head while you’re trying to get things snug.
What You’re Getting
- Grade 5 strength that’s tougher than hardware store bolts but won’t break the budget like Grade 8
- Square shoulder design that locks into wood or soft metal to prevent spinning during installation
- Zinc coating that resists rust and corrosion better than plain steel in farm conditions
- 2-1/2 inch length perfect for bolting through multiple pieces or thicker materials
- UNC coarse threads that go together easier and resist cross-threading
Built for Real Farm Work
This 7/16-inch carriage bolt handles the medium-duty connections you run into every day around the farm. You’ll find it perfect for mounting brackets to implement frames, securing wooden components on shop-built equipment, or anywhere you need a clean, flush-mounted bolt head that won’t catch on things or work loose from vibration.
Made to Last
Grade 5 bolts offer about 25% more strength than regular hardware store fasteners while costing less than premium Grade 8 bolts. The zinc plating helps them stand up to moisture, fertilizer spray, and road salt so they won’t rust out on you after a season or two in the weather.
Good to Know
The square shoulder needs to bite into the material to work properly, so make sure your hole isn’t oversized. If you’re going into metal, a quick tap with a hammer usually seats the shoulder. Always use a washer under the nut to spread the load and get proper torque values.
Reviews
There are no reviews yet.