Female Swivel 90 Degree Hydraulic Elbow for 1/2 Inch Hose with DIN 24 Heavy Thread

Description

When you’re building hydraulic lines and need to make a tight turn without fighting stiff hose, this 90-degree swivel elbow takes the stress out of the bend. Whether you’re hooking up a loader, connecting remote hydraulics, or adapting between different thread types, this fitting does the job right. The swivel feature means your hose can move naturally without putting strain on the connection—something you’ll appreciate when your implements are working hard and everything’s under pressure.

What You’re Getting

• Female swivel design lets the hose rotate freely, reducing wear and stress at the connection point
• Precision 90-degree angle gets your hydraulic line exactly where it needs to go
• DIN Heavy thread standard with 24-degree seat matches European hydraulic specifications
• Built for 1/2-inch hydraulic hose systems commonly found on farm equipment
• Crimp-style connection creates a permanent, leak-proof seal

Built for Real Farm Work

This fitting is designed for tractors and equipment that run hydraulic implements like loaders, backhoes, mowers, and remote cylinders. When you’ve got hydraulic lines that don’t quite match up or need to adapt between different fitting types, this piece bridges the gap and keeps your hydraulics flowing smoothly. It’s especially useful in tight spaces where a standard straight fitting would force the hose into an unnatural bend.

Made to Last

Hydraulic fittings are built to withstand decades of use, and this elbow shows why they’re trusted by farmers and mechanics worldwide. The precision-machined threads and quality materials handle the pressure spikes and constant vibration that come with farm equipment operation. The swivel bearing stays smooth season after season, even with the dirt and moisture that come with farm work.

Installation Notes

This is a crimp-on fitting that requires proper crimping equipment to attach to your hydraulic hose. Always use proper thread sealant on hydraulic fittings – never just tape that can contaminate your system. Clean both fitting surfaces before connecting, and don’t over-tighten as this can damage the threads or crack the fitting body. A snug fit with proper sealant beats overtightening every time. The swivel should move freely after installation but shouldn’t have any play in the connection.