Description
When your disc harrow starts feeling loose in the gang or you’re hearing grinding noises from the axle area, it’s time to check those axles. A worn or bent axle throws everything off—your discs won’t cut evenly, bearings wear out faster, and you’ll be fighting uneven field work all season long. This replacement disc axle gets your harrow running smooth again so you can get back to cutting residue the way it should be done.
What You’re Getting
- 1-1/8 inch square shaft that fits your disc gangs perfectly—no slop, no binding
- Nearly 60 inches of usable length handles even wide disc setups with room to spare
- 3-1/2 inches of cut threads on the end for secure nut attachment and easy adjustment
- Heavy-duty construction built to handle the twisting forces of field work
- Direct replacement design—bolts right in using your existing hardware
Built for Real Farm Work
This axle fits John Deere’s popular 200 series disc harrows including the 210, 215, 220, 230, 235, and 630 models. These are the workhorses you see cutting corn stalks, sizing wheat stubble, and working down seedbeds across farm country. Whether you’re running a smaller 210 on lighter ground or pulling a big 630 behind a high-horsepower tractor, this axle handles the load.
Made to Last
Square axles take tremendous stress as discs bite into the ground and twist through tough residue. This one’s forged from quality steel that won’t bend under normal field conditions. The precise square dimensions ensure your disc gangs stay tight and true, while the proper thread pitch gives you solid connection with the retaining nut.
Good to Know
Installation is straightforward—remove the old axle, slide in the new one, and tighten everything back up. Check your disc spacing while you’ve got things apart, and this is a good time to inspect bearings and replace any that feel rough. The 1-1/8 inch square size is critical—don’t try to make a different size work as it’ll just cause problems down the line.
Reviews
There are no reviews yet.