Description
When your Massey Ferguson’s brakes start feeling spongy or making noise, worn bushings in the rear axle housing are often the culprit. These bushings support the brake shaft that operates your disc brakes, and when they wear out, you’ll feel it every time you hit the pedal. Nobody wants to second-guess their brakes when bringing a full spreader down a hill or stopping at the end of a furrow.
What You’re Getting
- Precision-fit bushings with 25.55mm inner diameter that match your original specs exactly
- 26.91mm outer diameter ensures proper fit in the axle housing bore
- 19.12mm width provides full support for the brake shaft under load
- Pack of 2 bushings—you get both sides covered in one purchase
- Bronze construction that handles the heat and pressure of brake operation
Built for Real Farm Work
These bushings fit a wide range of Massey Ferguson models from the classic 35 and 135 utility tractors to the larger 200 series machines. Whether you’re running a 165 with a loader doing farmyard chores or using a 290 for heavy field work, these tractors all depend on reliable braking for safe operation in demanding conditions.
Made to Last
Farm brakes work harder than most folks realize—they’re constantly dealing with mud, moisture, and the stress of stopping heavy loads. These bronze bushings are built to handle that punishment while maintaining the tight tolerances needed for proper brake operation. They resist wear and corrosion better than standard steel bushings.
Installation Notes
You’ll need to remove the brake assembly and pull the old bushings from the axle housing. A good puller and press make the job much easier. Clean the housing bores thoroughly before pressing in the new bushings—any dirt or corrosion will cause premature wear. Make sure they’re seated fully and square in the housing for proper brake shaft alignment.
Reviews
There are no reviews yet.