Description

When you’re working hard ground or dealing with rocky conditions, your chisel plow spikes take a beating. A worn or bent spike doesn’t cut clean anymore and can throw your whole tillage operation off. This reversible chisel spike gives you the deep penetration you need to break up compacted soil while lasting twice as long thanks to its flip-around design.

What You’re Getting

Heavy-duty 5/8-inch thick steel construction that handles the toughest ground conditions
18-inch length provides excellent penetration for deep tillage work
Reversible design lets you flip it around when one end wears down, doubling your working life
Flat nose design cuts cleanly through soil without pulling up too much residue
Standard 1/2-inch bolt holes with proper spacing for easy installation on most chisel plows

Built for Real Farm Work

This spike is designed for chisel plows working conservation tillage, primary tillage, and residue management. The 2-inch width and flat nose profile make it ideal for breaking up compaction while leaving crop residue on the surface. Whether you’re preparing seedbeds in the spring or doing fall tillage after harvest, this spike handles the job without plugging up in heavy residue.

Made to Last

The thick steel construction stands up to rocks, roots, and hard-packed clay that would bend lighter spikes. The reversible feature means when one end starts to dull or wear, you just flip it around and keep going. That’s smart farming economics right there.

Installation Notes

This spike uses standard plow bolts through the 1/2-inch holes with 2-1/4 to 2-1/2 inch spacing. Most chisel plows use this bolt pattern, but it’s always smart to check your spacing before ordering. Keep a few spare bolts on hand since they tend to work loose in rocky conditions.