Description
When you’re heading down a steep hill with a loaded grain wagon or making a tight turn in the farmyard, the last thing you want is to worry about your brakes. A cracked or leaking brake fluid reservoir can turn routine work into a dangerous situation real quick. This replacement reservoir keeps your brake fluid where it belongs—in the system—so you can count on reliable stopping power when it matters most.
What You’re Getting
- 103mm height designed specifically for MF 300 series mounting setup
- Clear construction lets you spot dropping fluid levels before you lose braking power
- Chemical-resistant material stands up to brake fluid without cracking or clouding
- Proper venting keeps air from getting trapped in your brake lines
- Secure cap with seal prevents contamination from dirt and moisture
Built for Real Farm Work
Your 300 series MF is built for heavy-duty work—from field operations to hauling grain to town. The reservoir maintains steady fluid supply to the master cylinder whether you’re bouncing across rough ground or making repeated stops during hay season. The translucent design means you can check fluid level at a glance during your daily walk-around.
Made to Last
Farm equipment reservoirs take a beating from UV rays, temperature swings, and the corrosive nature of brake fluid itself. This replacement uses materials specifically chosen to resist chemical breakdown and stay flexible through years of use. The proper venting design prevents vacuum formation while keeping contaminants out of your brake system.
Installation Notes
The 103mm height is critical for proper fit in the 300 series mounting bracket. Clean the mounting area thoroughly and inspect brake lines while you’re at it. Only use fresh brake fluid from sealed containers—old fluid absorbs moisture and causes corrosion. A good time to check your entire brake system for leaks or worn components.
Reviews
There are no reviews yet.