Cam Follower Bearing for John Deere and Vermeer Round Balers

Description

When your baler’s pickup system starts making noise or the cam mechanism isn’t operating as smoothly as it should, this cam follower bearing is often the culprit. These specialty bearings take quite a beating in round baler applications—they handle the constant motion and heavy loads that come with picking up hay and feeding it into the chamber. A worn bearing can affect pickup timing and create unnecessary wear on other components.

What You’re Getting

• Half-inch bore size designed specifically for baler cam follower applications
• 1.505-inch outer diameter that fits properly in your baler’s pickup system
• AgSmart quality construction built to handle the constant cycling of hay pickup operations
• Specialty agricultural bearing designed for the unique demands of baling equipment
• Direct replacement that installs without modifications or special tools

Built for Real Farm Work

This bearing is engineered for the demanding world of round baler pickup systems where it guides cam followers through thousands of cycles per hour. Whether you’re baling alfalfa on a tight schedule or picking up heavy grass hay after a rain delay, the pickup system needs to keep running smoothly. The bearing handles both the radial loads from the cam action and the axial forces that occur during normal baling operations.

Made to Last

Baler bearings work in some of the dustiest, dirtiest conditions on the farm, and this one’s built accordingly. The sealed construction keeps contaminants out while retaining lubrication where it’s needed. The specialty ag construction uses materials and tolerances designed specifically for agricultural applications rather than generic industrial bearings that might not hold up to the unique stresses of hay baling.

Installation Notes

This is a direct replacement bearing that typically presses into place in the baler’s cam follower assembly. Before installation, clean the bearing pocket thoroughly and check for any damage to the surrounding components. A thin coat of anti-seize compound on the outer race helps with future removal. If you’re replacing one, it’s often worth checking the others in the system since they typically wear at similar rates.