Description

When you’re hooking up a grain cart, hay wagon, or any implement trailer, you need a reliable connection between your tractor and trailer lights. A cracked or corroded connector means you’ll be dealing with dead brake lights or turn signals just when the DOT officer pulls up behind you. This 4-pole female connector with 48 inches of quality wire gets your trailer lighting back to working order so you can haul with confidence.

What You’re Getting

Pre-wired with 48 inches of quality 16-gauge wire for easy installation
Molded construction that won’t crack or fall apart like cheaper connectors
Standard 4-pole flat configuration works with most farm trailers and implements
Weather-sealed design keeps moisture out and connections working
Heavy-duty terminals that grip tight and stay connected through rough field work

Built for Real Farm Work

This connector handles the standard trailer lighting setup – running lights, brake lights, left turn signal, and right turn signal. Whether you’re pulling a grain cart during harvest, moving hay equipment between fields, or hauling manure spreaders, this connector provides the reliable electrical connection your trailer lights need to stay legal and safe on public roads.

Made to Last

Farm trailers take a beating bouncing through fields and down gravel roads. The molded construction and quality wire insulation handle temperature swings, road salt, and the occasional scrape against a fence post. The terminals are built to maintain good contact even after countless hook-ups and disconnections.

Installation Notes

The 48-inch wire length gives you plenty of room to route the wiring where it needs to go without stretching or binding. Strip back about 1/2 inch of insulation on each wire and use quality butt connectors or solder joints for the most reliable connection. A little dielectric grease on the terminal contacts helps prevent corrosion in wet conditions.