Description

When you need to cap off a pipe line temporarily or seal an unused opening permanently, you want a fitting that won’t leak or corrode. Whether you’re winterizing irrigation lines, plugging unused hydraulic ports, or capping off water lines during equipment maintenance, this galvanized cap screws on tight and stays sealed.

What You’re Getting

Female NPT threads that match standard 1-1/4 inch pipe fittings
Galvanized coating that resists rust and corrosion in harsh farm conditions
Heavy-duty construction built to handle hydraulic and water pressure
Easy installation – just thread it on and tighten with a pipe wrench

Built for Real Farm Work

This cap works in hydraulic systems on tractors and implements, irrigation lines for crop watering, sprayer plumbing for herbicides and fertilizers, and water systems around the farm. You’ll find it handy for capping unused ports on equipment, sealing off seasonal irrigation lines, or closing temporary connections during maintenance work.

Made to Last

Farm fittings take abuse from pressure, chemicals, and weather extremes. The galvanized coating protects against rust and corrosion, while the solid construction handles the pressure spikes common in hydraulic and water systems without cracking or loosening.

Installation Notes

Thread the cap onto your 1-1/4 inch female pipe thread until hand-tight, then snug it down with a pipe wrench. Use pipe thread sealant or quality thread tape for leak-free connections. Don’t overtighten – the tapered threads seal properly with moderate torque, and excessive force can crack the fitting.