Description
When you’re running implements that need precise angle control but still demand serious strength, this heavy-duty top link with knuckle ball ends gives you the best of both worlds. Those ball joints let your equipment articulate smoothly over rough ground while the 520mm heavy-wall tube handles the stress that comes with bigger tractors and heavier implements.
What You’re Getting
- 30mm knuckle ball ends that move freely even under load, reducing binding and wear
- Heavy-duty tube construction that won’t bend when you’re pulling hard through tough conditions
- Wide adjustment range from 705mm to 974mm (almost 11 inches of adjustment)
- Black finish that resists corrosion and holds up to daily farm use
- Category 2 sizing that fits mid-size to large tractors running serious implements
Built for Real Farm Work
This top link is designed for Category 2 tractors typically in the 50-120 horsepower range running medium to heavy implements like offset discs, chisel plows, field cultivators, and larger mowers. Whether you’re working uneven ground where your implement needs to float independently or pulling through heavy soil that puts stress on every component, this link handles the job.
Made to Last
The knuckle ball design is a game-changer compared to standard pin connections that bind up and wear out. These ball joints articulate smoothly even when you’re working hillsides or rough terrain, and the heavy-wall tube construction stands up to the forces generated by serious implements without bending or failing.
Good to Know
Start with the link centered in its adjustment range to give yourself room both ways when fine-tuning implement angle. Keep those knuckle ball ends greased for smooth operation and long life. A quarter-turn adjustment can make a big difference in how your equipment performs, so make small changes and test before going further.
Reviews
There are no reviews yet.