Description

When your three-point hitch starts feeling loose or making noise, worn lift arm bushings are usually the culprit. This bushing fits right between your lift arms and draw pins, keeping everything tight and smooth so your implements stay where you put them. A simple part that makes all the difference between precise control and sloppy operation.

What You’re Getting

Perfect fit for both Category 2 and Category 3 hitch systems—covers most mid to large tractors
Zinc-plated finish resists corrosion and stands up to grease, hydraulic fluid, and weather
Precise 1-1/8 inch inside diameter matches standard draw pin sizes
1-3/4 inch length provides full support across the lift arm width

Built for Real Farm Work

This bushing works on tractors with Category 2 and 3 three-point hitches, which covers most utility tractors from about 35 HP up through the bigger row-crop and livestock machines. Whether you’re running a bush hog, box blade, or heavy tillage equipment, this bushing handles the side loads and pivot stress that come with real fieldwork.

Made to Last

The zinc plating isn’t just for looks—it keeps the bushing from seizing up on the pin even after months of mud, moisture, and temperature swings. The steel construction handles the constant flexing and loading that happens every time you raise or lower an implement.

Good to Know

Check both bushings when you’re replacing one—they usually wear at similar rates. A dab of grease on the pin before installation keeps things moving smooth. If the old bushing is really stuck, some penetrating oil and gentle heat will help it come out without damaging the lift arm.