Description
When you’re running a dry boom spray system, you need a nozzle body that keeps things simple and reliable. This TeeJet double barb nozzle body gives you two 3/4-inch hose connections with an 11/16 cap thread, letting you connect spray lines directly without the complexity of a wet boom plumbing system. It’s the straightforward approach that works when you need to get chemical where it needs to go.
What You’re Getting
- Dual 3/4-inch hose barbs for direct line connections on dry boom setups
- Celcon body construction that resists chemical damage and UV exposure
- Stainless steel threads that won’t corrode or wear out from constant cap changes
- 11/16 cap thread that fits all standard TeeJet spray tips and caps
- Direct replacement design that bolts right into your existing boom assembly
Built for Real Farm Work
This nozzle body is designed specifically for dry boom spray systems where you run individual hoses to each nozzle rather than piping chemical through the boom itself. You’ll find this setup on smaller sprayers, pull-type units, and custom spray rigs where simplicity and serviceability matter more than fancy plumbing.
Made to Last
The Celcon body material handles farm chemicals without cracking or becoming brittle, while the stainless steel threads stay smooth even after hundreds of tip changes. This combination gives you the chemical resistance you need with threads that’ll last for years of regular maintenance.
Installation Notes
The double barbs slide right onto your spray hoses and clamp down tight with standard hose clamps. Make sure your hoses are in good shape—a soft or cracked hose won’t seal properly no matter how tight you clamp it. Keep some spare hose clamps handy since they’re cheap insurance against leaks.
Reviews
There are no reviews yet.