Cast Iron Pillow Block Housing for 204 Series Bearings

Description

When you’re working on rotating equipment—whether it’s a conveyor, auger, or feed mixer—a worn bearing housing can turn a quick repair into a frustrating ordeal. This cast iron pillow block housing gives you the solid, reliable mounting you need to get things spinning smoothly again. It’s built to handle the vibration and loads that come with farm equipment.

What You’re Getting

• Cast iron construction that won’t crack or flex under heavy loads
• 47mm flange size designed for 204 series insert bearings
• Two-bolt mounting with 3/8-inch bolts spaced 3.86 inches apart
• Grease fitting lets you keep the bearing lubricated without tearing everything apart
• Works with both wide and narrow series self-aligning insert bearings

Built for Real Farm Work

This housing is perfect for any application where you need reliable bearing support—grain handling equipment, feed mixers, conveyors, and countless other pieces of equipment that keep your operation running. The cast iron construction handles the constant vibration and shock loads that lighter materials just can’t take.

Made to Last

Cast iron housings like this one are the standard in agricultural equipment because they hold up to years of hard use. The material dampens vibration naturally and won’t wear out the way cheaper housings do. You’ll get long service life even in dusty, dirty conditions.

Good to Know

The housing accepts bearing 20412 and other 204 series bearings. Make sure your new bearing fits snugly in the housing bore—a loose fit will cause premature failure. When you install it, use a good quality bearing grease and pump a few shots through the grease fitting to make sure everything’s properly lubricated.