Hydraulic Hose Crimp Fitting – 67.5 Degree Elbow with Code 61 Flange for 1 Inch Hose

Description

When you’re running hydraulic implements like loaders, mowers, or remote cylinders, proper hydraulic fittings make the difference between a system that works reliably and one that leaks. This 67.5-degree elbow fitting with Code 61 flange is designed to handle the tight routing situations you’ll find in modern tractor hydraulic systems. The angled design helps you make clean connections in cramped spaces without kinking hoses or creating stress points that lead to failures down the road.

What You’re Getting

• Precision-machined 67.5-degree elbow angle for optimal hydraulic line routing
• Code 61 flange connection that provides secure, leak-free attachment to hydraulic components
• Crimp-on design for permanent, high-pressure connections on 1-inch hydraulic hose
• 4S series construction built to handle the pressures and vibration of farm equipment
• 1-1/4 inch thread size for compatibility with standard agricultural hydraulic fittings

Built for Real Farm Work

This fitting is designed for tractors and equipment that run hydraulic implements like loaders, backhoes, mowers, and remote cylinders. The 67.5-degree angle is particularly useful when connecting hydraulic lines around tight corners or when space constraints won’t allow a full 90-degree elbow. You’ll find this angle works well for connecting to valve blocks, cylinders, and hydraulic motors where standard straight or 90-degree fittings just won’t fit properly.

Made to Last

Hydraulic fittings are made to resist corrosion, pressure, and wear that comes with daily farm use. The crimp connection creates a permanent seal that won’t work loose under pressure or vibration, and the Code 61 flange design distributes connection loads evenly to prevent stress cracking.

Installation Notes

Always use proper thread sealant on hydraulic fittings and clean both fitting surfaces before connecting. Don’t over-tighten as this can damage the threads or crack the fitting body – a snug fit with proper sealant beats overtightening every time. This is a crimp-on fitting that requires proper hydraulic hose crimping equipment for installation.