BSPT Male Crimp Fitting for 5/8 Inch Hydraulic Hose

Description

When you’re building or repairing hydraulic hoses on your equipment, having the right crimp fitting can make the difference between a job that holds up under pressure and one that leaves you stuck in the field with hydraulic oil pooling under your tractor. This BSPT male crimp fitting connects 5/8-inch hydraulic hose to British Standard Pipe Tapered threads, giving you a secure connection that won’t back out when you’re running implements hard.

What You’re Getting

• BSPT male threads designed to seal properly in tapered female ports
• 1/2-inch thread size that fits common hydraulic outlets on tractors and implements
• Crimp-on design that creates a permanent, leak-free connection to your hose
• T2000 series construction built to handle the pressure spikes of farm hydraulics
• Compatible with 5/8-inch inside diameter hydraulic hose for versatile system connections

Built for Real Farm Work

This fitting is designed for tractors and equipment that run hydraulic implements like loaders, backhoes, mowers, and remote cylinders. The BSPT threading is common on European-made implements and some older domestic equipment, so this fitting helps you connect different brands and generations of machinery without hunting for adapters or specialty parts.

Made to Last

Farm equipment faces pressure surges when you engage the PTO, temperature swings from morning frost to afternoon heat, and the constant vibration that comes with working ground or hauling loads. This crimp fitting handles those demanding conditions with precision-machined threads and materials that won’t crack or leak when your hydraulics are working hard.

Good to Know

This is a crimp-on fitting that requires proper crimping equipment and dies for installation. Make sure to use the correct die size for both the fitting and hose combination. Always use proper thread sealant designed for hydraulic systems on the BSPT threads—never just tape that can contaminate your fluid. The tapered threads will seal tightly when properly installed, but don’t over-tighten as this can damage the threads.