Description

When it’s time to freshen up that old Allis Chalmers engine with a valve job, you’ll need more than just the valve work itself. This comprehensive valve grind gasket set gives you all the seals and gaskets you need to button everything back up tight and keep your rebuilt engine running clean. No need to track down gaskets one by one—this complete set has you covered for the whole project.

What You’re Getting

Complete gasket set specifically designed for 201 CID and 226 CID 4-cylinder gas engines
All seals and gaskets needed for a proper valve job reassembly
Quality Tisco construction that matches OEM specifications
Saves time and trips to town by having everything in one package

Built for Classic Allis Workhorses

This set is made for the heart of many classic Allis Chalmers tractors—those reliable 4-cylinder gas engines that powered everything from cultivating to harvest work. Whether your WC is working a garden, your WD45 is running a hay mower, or your D17 is doing loader work around the farmstead, these engines were built to last and deserve proper gaskets when they get refreshed.

Made to Last

Tisco builds these gaskets to handle the heat cycles and pressure changes that come with farm work. The materials are chosen to seal properly against both the cast iron and aluminum surfaces found in these engines, maintaining compression and preventing oil leaks that can turn into bigger problems down the road.

Installation Notes

Use these gaskets any time you’re doing valve work or rebuilding the top end of your engine. Clean all mating surfaces thoroughly and check that head bolts are properly torqued to spec. A good tip—lay out all the gaskets before you start so you know what goes where during reassembly.