Description

When you’re setting up new plow shares or replacing worn ones, you need bolts that won’t let you down when you hit rocks or push through tough ground. These Grade 5 plow bolts give you the strength to handle whatever’s buried in your fields, while the zinc finish keeps rust at bay through seasons of spring work and fall stubble cleanup.

What You’re Getting

Grade 5 hardened steel that’s 25% stronger than standard hardware store bolts
Zinc finish protects against rust and corrosion in wet field conditions
Elliptical head design sits flush for smooth soil flow over plow surfaces
Standard 50-bolt package with hex nuts included—enough for most plow rebuilds

Built for Real Farm Work

These 1-inch by 3/8-inch bolts are the workhorses of plow maintenance. You’ll use them to mount shares, landside plates, and other tillage components that take a beating in rocky or root-filled ground. The elliptical head design keeps everything smooth where it counts—no protruding bolt heads to catch trash or create drag.

Made to Last

Grade 5 steel hits the sweet spot between strength and cost. It’s tough enough to handle impact loads when you hit buried obstacles but won’t break the bank like Grade 8 hardware. The zinc coating adds an extra layer of protection against the moisture and chemicals that come with modern farming.

Good to Know

The elliptical head design is key for plow bolts—it keeps the bolt head from sticking up where it would interfere with soil flow or catch on debris. When installing, make sure the head sits completely flush with the surface. A little anti-seize compound on the threads makes future removal easier if you need to replace shares again.