Description

When your tractor’s three-point hitch starts feeling loose or you notice play in the top link connection, it’s usually this pin that’s worn out. A sloppy connection here throws off your implement’s angle and can lead to poor performance whether you’re cultivating, mowing, or running a brush hog. This replacement pin gets your Category 2 hitch back to factory-tight specifications.

What You’re Getting

One-inch diameter pin built to Category 2 standards for medium to heavy implements
5-3/8 inch usable length provides proper engagement in the top link assembly
Seven-inch overall length with enough material for secure mounting
Heat-treated steel construction that won’t bend or break under load
Direct replacement design that installs without modifications

Built for Real Farm Work

This pin is designed for Category 2 three-point hitches found on mid-size to larger tractors—the workhorses that handle heavier implements like rotary cutters, box blades, and field cultivators. If you’re running equipment that needs the extra strength of Cat 2 connections, this is the pin that keeps everything aligned and working smoothly.

Made to Last

Farm implements put serious stress on hitch pins, especially when you’re working rough ground or making tight turns. This pin is built from quality steel that’s heat-treated to handle the constant loading and unloading that comes with three-point hitch work. The AgSmart construction means it’ll hold up season after season.

Good to Know

Installation is straightforward—just drive out the old pin and slide in the new one. Keep a drift punch handy for stubborn pins, and a little penetrating oil goes a long way if the old pin has been in there for years. Check your top link bushings while you’re at it—if they’re worn, now’s the time to replace them too.