Description

When your three-point hitch starts getting sticky or won’t hold position properly, worn lift arm bearings are usually the culprit. This weld-on ball end bearing restores smooth operation to your Fendt’s hydraulic linkage system, giving you back the precise control you need for proper implement positioning and field work.

What You’re Getting

108mm outer diameter bearing designed specifically for Fendt specifications
Durable ball joint construction that handles the constant pivoting and loading of hydraulic lift cycles
Weld-on design that creates a permanent, solid connection to your lift arm
Quality materials that resist wear from dirt, moisture, and the constant movement of field operations

Built for Real Farm Work

This bearing fits the hydraulic lift arms on Fendt Farmer 300 series utility tractors and the larger Favorit 500 series row-crop machines. Whether you’re running a cultivator, planter, or heavy tillage equipment, smooth lift arm operation is critical for getting implements in and out of the ground cleanly and maintaining proper working depth.

Made to Last

The bearing housing is built tough enough to handle the side loads and constant flexing that comes with three-point hitch work. The ball joint design allows for the natural movement of the linkage while keeping everything aligned properly. Quality seals keep dirt and debris out while retaining lubrication where it’s needed.

Installation Notes

This is a weld-on part that requires removing the old bearing and welding the new one in place. Make sure to clean all old grease and debris from the lift arm before welding. A good penetrating oil will help if the old bearing has seized to the arm. Take your time with the welding to ensure a strong, lasting repair.