Category 2 Lift Arm Drawbar for Medium to Large Farm Tractors

Description

When you’re setting up for planting season or getting ready to pull a heavy cultivator, having a solid drawbar that won’t bend or slip is critical. This heavy-duty Category 2 lift arm drawbar gives you the strength and adjustability you need for those bigger implements that can really put stress on your three-point hitch system. With 11 adjustment holes and a robust 30-1/2 inch design, you’ll have the flexibility to position your equipment exactly where it needs to be for optimal performance.

What You’re Getting

• Category 2 specification built for medium to large tractors up to 100 horsepower
• 11 precision-drilled holes give you fine adjustment for different implements and working conditions
• Heat-treated high carbon steel construction that won’t bend under heavy loads
• 26-inch usable length provides plenty of positioning options for various equipment
• 1-1/8 inch pin diameter and 3/4 inch hole spacing match Category 2 standards

Built for Real Farm Work

This heavy-duty Category 2 drawbar provides reliable implement connection and towing capability for medium to large agricultural tractors. The Category 2 specification accommodates tractors in the 40-100 horsepower range, delivering superior strength and durability for heavy-duty agricultural applications. Perfect for tractors used in diverse farming operations including field preparation, planting, cultivation, and harvesting. These tractors commonly pull implements such as plows, cultivators, harrows, seeders, mowers, and spreaders.

Made to Last

The one-piece construction and heat treatment process creates a drawbar that can handle the constant stress of heavy implements without developing stress cracks or bending. The high carbon steel material choice means this part will keep performing season after season, even when you’re pulling through tough ground conditions or dealing with side loads from uneven terrain.

Installation Notes

Installation involves mounting the drawbar to the tractor’s rear linkage using appropriate pins and hardware. Ensure proper pin diameter and spacing compatibility before installation. The 11-hole design lets you dial in the exact position for your implement—start with the center position and adjust from there based on how your equipment tracks and handles. Always use Grade 8 hardware and check mounting points periodically for wear.